Single Plate Wafer Swing Check Valve

Description
Factory Show

Description

Product Attributes

Model No.: SWC150

Brand: OEM

Types Of: Metal Check Valves

Support Customization: Oem

Place Of Origin: China

Application: General

Medium Temperature: Medium Temperature

Power: Manual

Flow Medium: Oil, Water, Gas

Structure: Check

Construction: short pattern wafer

Product Description

Swing Wafer Type Check Valve CS/SS 150LB Single Disc

DCV Series

This thin type of single-plate Wafer Check Valves are swing type, that performs the same with swing check valve with much less cost. The disadvantage of this single-plate wafer check valves is, the inside diameters of the valves can only meet 60-80% of Norminal Pipe Size(NPS), which limits the flow coefficient.

Features of Thin Type Single-plate Wafer Check Valves:

Short Face-to-face (Thin Type)
Reduced Bore, Swing Plate
Disc Spring Available
O-ring on Body Available
Applicable Standards of Thin Type Single-plate Wafer Check Valves:
Design&Manufacture:API 6D, API 594
Face to Face: API 6D, ASME B16.10, EN 558
Connection End: ASME B16.5, EN 1092, JIS B2220
Test and Inspection: API 6D, EN 12266, API 598
Sizes: 2" - 36" or DN50 - DN900
Pressure Rating: Class150 - Class600 or PN16 - PN100
Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.

Features

Economical design: Low Weight and short laying length produce savings initial cost, space requirements and installation when compared to Full-body swing type check valve
Quick closure

No. PART CV42/CV42L-CS CV42/CV42L-SS
1 Body          Carbon Steel      Stainless Steel
A216 Gr. WCB     A351 Gr. CF8M
2 Seat          Metal/Viton/Buna-N   Metal or Viton
3 Disc Stainless Steel     Stainless Steel
A351 Gr. CF8M    A351 Gr. CF8M
4 Spring (2) Inconel X-750    Inconel X-750
5 Shaft/Stop Pin Stainless Steel Stainless Steel
A276 Gr. 316     A276 Gr. 316
6 Cap Carbon Steel ASTM A105    Stainless Steel A351 Gr. CF8M
7 Eye Bolt         Carbon Steel    Carbon Steel